RAMMER S 83 STD - Page 22

© 2005 SANDVIK TAMROCK CORP.Page 22 - OPERATION
Operation S 83 STD
6. When demolishing vertical structures (e.g. brick walls), place the tool against
the wall at a 90 degree angle.
7. Start the hammer.
8. A safety screen is recommended to protect the operator from flying debris.
Keep the cabin windows and doors closed during operation.
9. Note: Listen to the hammer's sound when you are using it. If the sound becomes
weaker and the impact less efficient, the tool is misaligned with the material
and/or there is not enough down force on the tool. Realign the tool and press the
tool firmly against the material.
;
;
;
;
;
;