TRAKFAST REPAIR MANUAL
59
Rev. 09/07
SERVICE BULLETIN
ISSUE DATE: December 4, 2001
SUBJECT: TrakFast Tool (TF1100) Nose Changes
REVISION: All TF1100 tools built since August 2001 (serial #301080281) are equipped with a new style “telescoping
nosepiece”. Tools built before August 2001 use what is referred to as the “Standard or Original Nose”.
REASON FOR CHANGE: The “Telescoping Nose” provides improved fastener guidance, thereby increasing fastener
“stick” or success rate along with the elimination of plastic jamming in the end of the nose.
ACTION REQUIRED: No action required. Please Note: Magnetic probes used for the TrakFast tool are “nose specific”.
See photos below.
Standard or Original Nose with Magnetic Probe (7405151)
Telescoping Nose with Magnetic Probe (7405173)
To Next Page
Loading...