79
(Mod.USB)
The bottom hatch door (g.3 – item14) will close
itself automatically.
Be careful with your hands when accessing the
controls located in the machine’s bottom section.
Programming Panel
This panel features 4 buttons with the following func-
tions:
- Button with “+” sign
to scroll through the menu items or to increase the sizes.
- Button with “-” sign
to scroll through the menu items or to increase the sizes.
- Button with “enter” sign
To enter the programming menu. Or to conrm entries
- Button with “esc” sign
To quit the menu or to quit programming mode.
When the “+” and “ “buttons are pressed for approximately 2 seconds,
the “bartender” programming menu is activated. This menu contains the
following submenus:
This menu allows you to select the language to be
used to show and messages on the display. You can
select among the following languages: Italian, En-
glish, Spanish, French, German and Portuguese.
To move from one submenu to another, press “+” or “-”. To enter in a
submenu, press “enter”, while to quit, press “esc”.
When a submenu is accessed, the editable value is displayed and chan-
ges can be made to it by pressing on the “+” or “-” keys.
If you make changes, these must be confirmed by pressing “enter” until
you quit the submenu. If you do not wish to save your changes, press
“esc”.
To Next Page
Loading...
Need help?
General
