Do you have a question about the Rancilio Classe 9 RE and is the answer not in the manual?
Brand | Rancilio |
---|---|
Model | Classe 9 RE |
Category | Coffee Maker |
Language | English |
Appliance use by children/impaired persons requires supervision; installation/maintenance by trained personnel.
Covers child supervision, area access, packaging, obstructions, liquid handling, and cleaning precautions.
Guidelines for machine placement, clearance, storage, and environmental restrictions.
Guidelines for machine placement, required clearance, storage, and stacking of packaging.
Compliance with plumbing codes, use of water supply hoses, and work surface incline limits.
Restrictions on machine placement in areas with water jets, high humidity, or outdoor exposure.
Stresses that installation must be performed by qualified Rancilio personnel or trained technicians.
Requirements for water supply setup, non-return valve, pipe rinsing, and support surface characteristics.
Electrical connection by qualified personnel, data checks, power switch placement, and emergency procedures.
Safety procedures for maintenance, including powering off the machine and using original parts.
Requirements for mains disconnection devices, grounding, conductor sizing, and circuit breakers for safety.
Prohibits adapters and extensions; guidelines for replacing damaged power cables.
Specific requirements for UL-listed grounding plugs for North American installations.
Step-by-step guide to turn on the machine, including water supply, main switch, and boiler heating.
Step-by-step guide to safely turn off the machine, including component shutdown and cleaning.
Detailed steps for brewing coffee, including filter preparation and dispensing.
Instructions for dispensing hot water for beverages like tea.
Guide on how to steam milk using the C-lever for pulsing or continuous steam.
Procedures for removing the finished product and cleaning the steam wand after use.
Instructions for using You-Steam to prepare hot milk.
Instructions for using You-Steam to prepare foamed milk.
Guide to cleaning the machine's exterior housing and stainless steel parts following the grain.
Instructions for cleaning the steam wand, hot water spout, and group head nozzles to remove deposits.
Procedures for cleaning filter holders, filters, and seals under the group heads.
Prepare a cleaning solution and immerse filter holders and filters for at least 20 minutes.
Rinse components thoroughly, reattach filter holder, and clean cup tray grid and drain outlet.
Clean the machine and disconnect it from the main power supply by a qualified person.
Close the water tap and cover the machine, storing it in a dry environment away from elements.
Position the machine on a stable surface, ensure clearance, balance feet, and connect the water supply tube.
Attach drain tubes, connect equipotential earthing wire, and connect the main power supply.
Troubleshooting steps if the machine does not start, checking power supply and electrical components.
Solutions for water leaks under the machine, slow dispensing, and issues related to coffee grind fineness.
Guidance on resolving irregular steam delivery by checking steam wand tips.
Initial steps to prepare the machine for first use, including water connection and power activation.
Flushing the hydraulic circuit with steam, hot water, and emptying the boiler for initial setup.
Steps to prepare for boiler draining, including removing parts and inserting the drain tube.
Final steps to complete draining, reassemble components, and refill the boiler if required.
Covers machine dimensions, weight, noise level, water inlet, drainage, and operating ambient temperature.
Details electrical supply requirements, boiler pressure, temperature, and capacity for different models.
Provides technical specifications for the machine's heat exchangers, including pressure and temperature ratings.
Details the machine's safety devices and compliance with European directives and standards.
Instructions for connecting the machine using a three-phase star configuration with neutral.
Instructions for connecting the machine using single-phase configurations, including US voltage.
Instructions for connecting the machine using a Delta configuration.