73
SELEZIONE
LINGUA
RESET
RIGENER.
RESINE
BEEP
SUI TASTI
OROLOGIO
SET TIMER
CONTATORI
PARZIALI
9.2. Programming (Mod.SDE)
Programming Panel
This panel features 4 buttons with the following
functions:
- Button with “+” sign To move to a higher level
in the programming menus. Or to increase the
value
- Button with “-” sign To move to a lower level in the
programming menus. Or to decrease the value
- Button with “enter” sign To enter the pro-
gramming menu. Or to confirm entries
- Button with “esc” sign To quit the menu
Or to quit programming mode.
When the “+” and “ – “buttons are pressed for appro-
ximately 2 seconds, the “bartender” programming
menu is activated. This menu contains the following
submenus:
-
Language selection
- Softener regeneration
- Beep
- Clock
- Set clock
- Date-time format
- Set timer
- Automatic switching ON
- Selection counts
- Coffee group 1
- Coffee group 2
- Coffee group 3
- Coffee group 4
- Water group
- TSC group
- Counter total
- Reset counters
If you make changes, these must be confirmed by
pressing “enter” until you quit the submenu. If you do
not wish to save your changes, press “esc”.
RESET
RIGENER.
RESINE
BEEP
SUI TASTI
OROLOGIO
SET TIMER
CONTATORI
PARZIALI
ITALIANO
FRANCAIS
ENGLISH
DEUTSCH
ESPANOL
PORTUGUES
SELEZIONE
LINGUA
9.2.1. Selecting the Display Language
This menu allows you to select the language
to be used to show and messages on the
display. You can select among the following
languages: Italian, English, Spanish, French,
German and Portuguese.
To move from one submenu to another, press “+” or
“-”. To enter in a submenu, press “enter”, while to
quit, press “esc”.
When you enter a submenu, the display flashes the
editable value. To make changes, use the “+” or “-”
buttons.
SELECTION
LANGUAGE
REGENERATION
RESET
BEEP
CLOCK
SET TIMER
COUNTER
SELECTIO
N
SELECTION
LANGUAGE
REGENERATION
RESET
BEEP
CLOCK
SET TIMER
COUNTER
SELECTIO
N
ITALIANO
FRANCAIS
ENGLISH
DEUTSCH
ESPANOL
To Next Page
Loading...
Need help?
General
