To Next Page

To Previous Page

Preparing for use

R&S

NRP Series

26Getting Started 1419.0170.02 ─ 16

ceed or if the instrument is set to using alternate TCP/IP configuration, the IP

address must be set manually.

For a description on how to set the IP address manually, refer to the user

manual.

Use hostnames to identify the sensor

In networks using a DHCP server, it is recommended that you address the

sensor by its unambiguous hostnames, see Chapter 3.7.3.3, "Using host-

names", on page 24.

A hostname is a unique identifier of the power sensor that remains perma-

nent as long as it is not explicitly changed. Hence, you can address a power

sensor by the same identification, irrespectively if a network or a point-to-

point connection is used.

Connecting to a controlling host

Other manuals for R&S NRP Series

Questions and Answers:

Need help?

Do you have a question about the R&S NRP Series and is the answer not in the manual?

General