R&S NRP Series Getting Started

Operating concepts
R&S
®
NRP Series
35Getting Started 1419.0170.02 ─ 16
For further details, see the user manual.
NRP Version Display
Displays version information of all installed, power measurement-relevant soft-
ware packages.
R&S NRP‑Z Uncertainty Calculator
Determines the expanded measurement uncertainty. The tool comes with a man-
ual (PDF) that is also available in the "Start" menu.
S-Parameter Update Multi
Helps loading an S-parameter table into the power sensor.
For further details, see the user manual.
Terminal
Low-level communication program for sending commands to the power sensor.
5.2 Browser-based user interface
Requires a power sensor with networking capabilities, a LAN power sensor.
With the integrated, browser-based graphical user interface of the LAN power
sensor, you can easily configure the most common settings and measure in the
provided measurement modes.
There is no installation required. The web user interface can be used with all devi-
ces and operating systems, including tablets and smart phones that are connec-
ted to the same network.
Required equipment
●
R&S NRP LAN power sensor
●
LAN cables
●
PoE Ethernet switch or a non-PoE Ethernet switch and a PoE injector
●
Device with a supported web browser installed:
Browser-based user interface

R&S NRP Series Specifications

General

Product Type	Power Sensor
Connector Type	SMA, 3.5 mm, 2.4 mm
Interface	USB, LAN
Storage Temperature	-40°C to +70 °C
Dimensions	Dependent on model
Weight	Dependent on model
Compatibility	R&S Instruments
Type	Diode