R&S RTO2000 - Changing the Waveform Scaling and Position

Trying Out the Instrument
R&S
®
RTO2000
56Getting Started 1332.9719.02 ─ 10
5. To save space in the display, tap "Minimize" in the result box.
The most important results are shown in the result icon.
6. To remove the result icon and make room on the display for other results, tap
the red cross on the icon label.
6.7.2 Performing an Amplitude Measurement
To measure the voltages of a pulse quickly, measure the amplitude in the time
domain.
1. To restore the default signal channel settings, press the [Preset] and [Autoset]
keys.
Performing Basic Measurements