Rane HAL1x - Discontinued EXP Models

In addition to connecting the physical Expansion Unit hardware to your HAL device, you must also add the
Expansion Unit to your HAL configuration.
NOTE: You can connect a maximum of thirty-two Expansion Units to a HAL1x device using a daisy-chain
configuration.
Discontinued EXP Models
The following EXP models are no longer in production. For the most current list of EXP models, see the Rane web-
site. Data Sheets for discontinued models may also be downloaded from the Rane website.
EXP1
This device adds the following additional capability to a HAL1 system:
HAL SYSTEM INSTALL GUIDE
66