EasyManua.ls Logo

Rane MP2014 - MP2014 Overview; Key Features and Design Highlights; USB and Connectivity Features; Channel Input and Output Details

Rane MP2014
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
MP2014 MANUAL
MP2014 Overview
Highest quality user control surface
Excellent control ergonomics with intuitive and comfortable layout.
Potentiometers with exceptional feel and 1 million cycle life.
Studio console grade backlit push switches.
Digital Signal Processing
A/D and D/A dynamic range 116 dB A-weighted, THD+N 0.001%.
All audio processing is 32-bit oating point with supported sample rates: 44.1 kHz, 48 kHz or 96 kHz.
S/PDIF input for Session input with 128 dB dynamic range with ultra-low jitter and 16:1 SRC conversion range.
S/PDIF Session output to record mix or chain mixers together without analog conversion.
Two USB ports allow simultaneous connection of two computers
Each USB port supports 6 playback and 14 record channels.
Simultaneously play stereo tracks to Deck 1, Deck 2, and the USB Aux.
Simultaneously record 2 Decks as pre-fader, as post-fader, the Session Input, the Mic Input, and the Main mix.
USB 2.0 high-speed class compliant MIDI and Audio
Driver installation is not required for Mac OS X.
High-performance universal ASIO driver is provided for Windows.
Computer control panel supports additional options and status.
Analog I/O designed with attention to detail
Accurate, low noise RIAA stages with 3rd-order Infrasonic (rumble) and 2nd-order low-pass lters.
Transient voltage and EMI protection, turn-on muting and overload protection.
8 Vrms balanced outputs, 4 Vrms unbalanced I/O.
Two Deck inputs with these features:
Select USB A, PH/CD, AUX or USB B input with Gain trim and RIAA Phono sensitivity.
Deck 1 USB playback channels 1-2
Deck 2 USB playback channels 3-4
3-band full-cut EQ with 2 selectable crossover points: Linkwitz-Riley 2nd-order
4th-Order selectable Low-pass, Low/High-pass, or High-pass lter with Mode, Resonance and on/off controls.
Effects Loop send to an external processor, returned to the Main Mix.
Main Mix Level control, Headphone Cue, 16-segment Q-peak meter with Peak-hold.
Session Input with Level control
Source may be unbalanced RCA, S/PDIF or USB AUX playback channels 5-6.
Microphone input with Mic / Line-level switch
Combo XLR and 1/4" TRS input jack.
May be used directly with a mic, or a line-level (wireless) input.
Input Level control, 1-knob Tone control, on/off switch and music Duck controls.
High performance Integrated Isolator EQ
4th-order Linkwitz-Riley 3-band Isolator with adjustable crossover points; exceptionally smooth.
Main Mix with 16-segment stereo Meter
Balanced XLR Main Output with Level control.
Balanced 1/4" TRS Booth Output with Level control.
Session Output with Level control.
S/PDIF output for digital recording or chaining mixers together.
Unbalanced RCA analog outputs.
Headphone monitor
Level Control, Cue/Main Pan, Mono Split or Stereo Cue.
Conveniently located 3.5 mm and 1/4" jacks on the front panel and another 1/4" jack on the top plate.
USB Record outputs:
USB record channels 1-2: Deck 1 pre-fader (for DVS).
USB record channels 3-4: Deck 2 pre-fader (for DVS).
USB record channels 5-6: Main Mix.
USB record channels 7-8: Deck 1 post-fader (for DAW or archiving).
USB record channels 9-10: Deck 2 post-fader (for DAW or archiving).
USB record channels 11-12: Session In.
USB record channels 13-14: Mic In.

Related product manuals