Ranger DST-64T User Manual

1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: (800) 253-2363
Tel: (805) 933-9970
rangerproducts.com
Wheel Balancers
Installation and Operation Manual
Manual P/N 5900192 — Manual Revision F — March 2021
Models:
• DST-64T
• DST642D
DST-64T shown.
Designed and engineered in Southern California, USA. Made in China.
⚠
DANGER
Read the entire contents of this manual before using this
product. Failure to follow the instructions and safety precautions
can result in serious injury or death. Make sure all operators read
this manual. Keep the manual near the product for future reference.
By proceeding with installation and operation, you agree
that you fully understand the contents of this manual and
assume full responsibility for product use.

Ranger DST-64T Specifications

General

Brand	Ranger
Model	DST-64T
Category	Automobile
Language	English

Summary

Safety Considerations

Safety Information

Key safety guidelines and precautions for operating the wheel balancer.

Installation

Installation Safety and Preparation

Component Assembly and Wiring

Anchoring and Power Connection

Procedures for securing the balancer, connecting power, and performing initial operational tests.

Operation

Operational Safety and Preparation

Critical safety measures, pre-balancing checks, and weight placement guidance.

Display, Controls, and Measurements

Wheel Mounting and Balancing Modes

Procedures for mounting wheels and detailed steps for various balancing modes.

Maintenance

Regular Maintenance Schedule

Troubleshooting

Common Issues and Solutions

Guidance on identifying and resolving common problems encountered with the wheel balancer.

Calibration Procedures

Weight Location Verification

Wiring Information