EasyManua.ls Logo

Ranger DST-642D - User Manual

Ranger DST-642D
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the
purchaser upon receipt from the carrier. Consequently,
claims for the material damaged in shipment must be
made by the purchaser against the transportation
company at the time shipment is received.
BE SAFE
Your new Ranger balancer was designed and built
with safety in mind. However, your overall safety
can be increased by proper training and thoughtful
operation on the part of the technician. DO NOT
operate or repair this equipment without reading
this manual and the important safety instructions
shown inside.
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Toll Free 1-800-253-2363
Tel: 1-805-933-9970
Fax: 1-805-933-9160
www.rangerproducts.com
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read this manual.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT
YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
Rev. E 02-15-2017
P/N 5900192
INSTALLATION AND OPERATION MANUAL
WHEEL BALANCERS
FOR BALANCING AUTOMOBILE,
& LIGHT TRUCK TIRES / WHEELS
MODELS:
DST-64T
DST-642D
Question and Answer IconNeed help?

Do you have a question about the Ranger DST-642D and is the answer not in the manual?

Ranger DST-642D Specifications

General IconGeneral
BrandRanger
ModelDST-642D
CategoryAutomobile
LanguageEnglish

Summary

READ FIRST

BE SAFE

OPERATOR PROTECTIVE EQUIPMENT

Definition of Hazard Levels

Defines hazard symbols and signal words like Danger, Warning, and Caution.

Owners Responsibility

Outlines owner's duties for safe operation, maintenance, and supervision.

Safety Instructions;Cautions

General safety guidelines and precautions to ensure safe operation of the equipment.

DEFINITIONS OF HAZARD LEVELS

OWNERS RESPONSIBILITY

IMPORTANT SAFETY INSTRUCTIONS

Electrical Requirements

Floor and Space Requirements

INITIAL START-UP

ACTIVATING THE OUTER GAUGE ARM

CONTROL PANEL AND DISPLAY

SELECTING WEIGHT POSITIONS FOR DIFFERENT WHEEL TYPES

MOUNTING WHEELS

BALANCING INSTRUCTIONS

Spin Mode; DYNAMIC

Spin Mode; STATIC & STATIC 2

ALU EXACT TWO PLANE MODE

HID MODE (HIDDEN WEIGHT)

Re-checking the Balance

After Balance Vibration Problems

TROUBLESHOOTING GUIDE

CALIBRATION

Importance and procedure for monthly calibration of the wheel balancer.

WEIGHT LOCATION VERIFICATION TEST

OUTER GAUGE ARM CALIBRATION PROCEDURE

DISTANCE SLIDE RULER CALIBRATION PROCEDURE

DUAL-PLANE SELF-CALIBRATION PROCEDURE

Err. -1-

Err. -2-

Err. -3-

Err. -4-

Failed Calibration Check

No Display

No Weight Information Displayed

Related product manuals