SERIES 2000 INSTALLATION, OPERATION AND SERVICE MANUAL
2
1.3 Safety Labels and Their Placement
Product safety signs or labels should be replaced by
product user if they are no longer legible. Please
contact Rapid Engineering LLC or your RAPID
®
independent distributor to obtain replacement signs
or labels.
1.4 California Proposition 65
In accordance with California Proposition 65 require-
ments, a warning label must be placed in a highly
visible location on the outside of the equipment (i.e.,
near equipment's serial plate). To order additional
labels, please contact Rapid Engineering LLC or
your RAPID
®
independent distributor.
To Next Page
Loading...