32
S. STOP TIME: It sets the Safety Stop’s time in minutes.
You can set the time from 0 to 9 minutes (if 0 the Safety Stop is omitted)
Do you know what?:
The different diving agencies can recommend different times for the Safety Stop.
Ask your Instructor or your diving diving certification agency for the value they suggest.
S. STOP DEPTH: It sets the Safety Stop’s depth.
You can set the Safety Stop’s depth between 3 and 9 metres.
The Safety Stop is carried out one meter deeper, than the depth you have set .
(eg. if S.STOP DEPTH= 5 the stop is carried out from 5.9 metres)
The Safety Stop is recommended only for dives deeper than 9 metres.
The timer is re-set if the depth of 9 metres is passed again.
Do you know what?:
If in the dives with deco, a deco stop is set between 10 and 1 mt, the Safety Stop is automatically omitted.
DEEP STOP: It selects if use the Deep Stops and which algorithm is to be used to
calculate the DEEP STOPS:
OFF: Deep Stop unabled
STD: Standard Method (half of the max. depth for 2,5 minutes)
PYLE: Pyle Method (ask your instructor for the Pyle Method)
A
b
To reach this menu from the main
screen press in sequence:
DIVE SETTINgS
ALGORITHM:
GFL/GFH:
S.STOP TIME:
S.STOP DEPTH:
DEEP STOP:
WATER:
DIVE MODE:
b
A C D
ExIT
NExT
ENTRY
+
_
BUL
93/93
3
5
OFF
SALT
SCUBA
To Next Page
Loading...
