Program mode
55 / 85
Check program
step info/button instructions
1 Use the selection button to set “prog/start”.
2 Choose the required program.
3
Press “prog/start” to show the first program
step. Press the button again to request the next
step. The cooking cabinet door should be open.
- If the display flashes, it means the program slot is vacant.
- The remaining cooking time for the program is shown in the “cooking time/core temperature”
display. If the program includes a step with core temperature, the remaining time is only shown
when this step has been finished.
- After the last program step has been requested by pressing the “prog/start” button, you start
again.
To Next Page
Loading...
