Settings Time/Date
64 / 85
You can set the time and date on your unit for correct evaluation of HACCP data. Carry out
the settings as follows.
step info/button instructions
1 "Prog/Start" anwählen
2 Turn the selection button clockwise.
3 Appears on the display.
4 Press the button.
8
Shown on the upper display for the hour setting.
The current hour appears in the lower display.
9
Turn the lower selection button to set the hour
and save this using the “prog/start” button.
10
Shown on the upper display for the minute
setting. The current minute appears in the lower
display.
11
Turn the lower selection button to set the hour
and save this using the “prog/start” button.
12
Shown on the upper display for the minute
setting. The current day appears in the lower
display.