Rational CombiMaster Plus 61

Maintenance
78 / 85
Replacing the door seal
The door seal is fitted in a groove on the cooking
cabinet.
- Pull the old seal out of the groove.
- Clean the guide rail.
- Insert new seal into the groove (moisten the
retaining lips with soapy water).
- The rectangular part of the seal must be seated fully
in the holding frame.
Cooking cabinet seal:
6 x 1/1 GN No: 20.00.394
6 x 2/1 GN No: 20.00.395
10 x 1/1 GN No: 20.00.396
10 x 2/1 GN No: 20.00.397
20 x 1/1 GN No: 20.00.398
20 x 2/1 GN

No: 20.00.399

Replacing the halogen lamp
First switch off the unit at the mains!
- Cover the unit drain in the cooking cabinet.
- Remove the frame with glass and seal.
- Replace halogen bulb (article no.: 3024.0201), do
not touch the bulb with your hands).
- Replace sealing frame as well (article no.:
40.00.094).
- Screw the frame in place with glass and seals.