CHAPTER 9
94 Viper/Viper 4+ Installation & Operation Manual
FIRMWARE DOWNLOAD EXAMPLE
NOTE: The following procedure is intended for example purposes only. Any images provided in this section
may not accurately depict the web browser or prompts encountered on various home or office
computer systems. Please refer to computer or web browser user help sections for additional
assistance.
To download firmware updates for a ROS device integrated receiver:
1. On a computer, visit the Raven Help web site.
2. Select the Product Support menu and locate the specific ROS device to be updated.
3. Select the Software Updates option to view available software options. Unless otherwise instructed by a
support or service technician, it is recommended to download the latest ROS version.
4. Select View to review the software release notes for the new software version. The release notes page may have
important information about updating the receiver. Please review these notes and be sure to follow any special
instructions.
5. At the bottom of the release notes page, select Download Update.
To Next Page
Loading...
