CHAPTER 7
54 Viper/Viper 4+ Installation & Operation Manual
7. Use the displayed browser to locate and select the “slingshotArchives” folder. Slingshot Archive files currently
stored on the USB flash drive will be displayed in the lower portion of the USB manager tab.
For Example. “USB Drive Name” > Raven > slingshotArchives
8. Touch the box displayed to the left of the listed file names to select specific files to import. Alternatively, touch
the Select All option at the top of the file list to select all files currently displayed.
9. With at least one file selected, select one of the following import actions:
•Copy - create a duplicate of the selected information on the ROS device
•Move - import the selected information to the ROS device and remove the information from the USB
flash drive.
The Import Files prompt will display.
10. Verify the list of files to be imported is correct. If the list requires further configuration, touch the Cancel button
to return to the USB Manager tab.
11. Touch the Import button to begin the file transfer process.
IMPORT PRESCRIPTION (RX) MAPS
NOTE: Prescription maps may also be imported via a Slingshot Archive (.ssa) file type. Refer to the Import a
Slingshot Archive section on page 53 for assistance importing this file type.
To import a prescription or Rx map from a USB flash drive:
1. Insert a USB flash drive used with the ROS device and containing the prescription map to be imported.
2. Touch the Administrator or User Panel along the top of the Main Panel display to expand the panel.
3. Select the File Manager utility and touch the USB Manager tab.
4. Touch the USB drop down and select the connected USB flash drive from which to import files.
Administrator
or User Panel
File Manager
USB Manager
To Next Page
Loading...
