11
CANbus Device Set Up: 117
CANBUS DEVICE SET UP
To configure the number of switches necessary to control implement section functions:
1. Touch the Edit icon in the Machine Panel to view the machine devices.
2. Locate and select the On-Screen Switch Box module.
NOTE: If the on-screen switch box has been previously configured, a summary of the switch box assignments
will be displayed.
3. Touch the Edit icon in the upper, right corner of the Summary screen and touch the On-Screen Switch box tab.
4. Touch the number of switches value and use the on-screen keypad to enter the desired number of switches to
control implement section functions.
5. If desired, touch the section labels in the lower portion of the on-screen switch box tab to customize the switch
box labels displayed during field operations.
To configure the on-screen switch box and automatically configure the section mapping or switch assignments:
1. Touch the Edit icon in the Machine Panel to view the machine devices.
2. Locate and select the On-Screen Switch Box module.
NOTE: If the on-screen switch box has been previously configured, a summary of the switch box assignments
will display.
3. Touch the Edit icon in the upper, right corner of the Summary screen and touch the On-Screen Switch Box tab.
4. To automatically assign sections to configured switches, touch the Auto-Map Sections button in the lower, right
corner of the display. This button will only be available if the number of configured implement sections
matches the number of switches.
NOTE: Verify the section assignments before starting an actual field operation with the automatic section
assignments.
To manually set up the on-screen section switch box assignments:
1. Touch the Edit icon in the Machine Panel to view the machine devices.
2. Locate and select the On-Screen Switch Box module.
NOTE: If the on-screen switch box has been previously configured, a summary of the switch box assignments
will display.
3. Touch the Edit icon in the upper, right corner of the Summary screen.
4. Touch the Switch Assignments tab.
5. Select a switch function in the upper portion of the Assignments tab.
Edit
On-Screen
Switch Box
Edit
On-Screen
Switch Box
Edit
On-Screen
Switch Box
Edit
On-Screen
Switch Box
Edit
On-Screen
Switch Box
Edit
Switch
Assignments
To Next Page
Loading...
