Raven viper 4+ - Unit and System Preferences

5
Administrator and User Profiles: 25
ADMINISTRATOR AND USER PROFILES
UNIT PREFERENCES TAB
The Unit Preferences tab provides access to personalized language and display unit preferences. To configure unit
preferences:
1. Touch the Administrator or User Panel along the top of the Main Panel display and select the User Profile
button.
2. Touch the Location Information tab on the General User Settings prompt. The following fields will be available:
Base Units. Select the desired unit system:
Pressure Units. Select the desired pressure units:
Date Format. Select the preferred date format.
Time Format. Select the preferred time format.
Automatic Daylight Savings. Enable automatic daylight savings time adjustments if the local time zone
jurisdiction observes daylight savings time.
SYSTEM PREFERENCES TAB
The System Preferences tab provides access to settings to customize the ROS device display and operation. To
adjust system preferences:
1. Touch the Administrator or User Panel along the top of the main panel display and select the User Profile
button.
Unit System Units
Metric
centimeters (cm), liters (L), hectares
(ha), kilometers per hour (km/h)
U.S. (English)
inches (in), gallons (gal), acres (ac),
miles per hour (mph)
Turf
inches (in), gallons per 1000 square
feet (gal/1000 ft
2
), miles per hour
(mph)
Abbreviation Units
PSI Pounds per square inch
kPa kilopascal
bar bar or atmospheric
inHg Inches of mercury
mmHg Millimeters of mercury
atm Atmospheres
hPa Hectopascal
Administrator
or User Panel
User
Profile
Unit
Preferences
Administrator
or User Panel
User
Profile
System
Preferences