CHAPTER 7
46 Viper/Viper 4+ Installation & Operation Manual
To export job data from the ROS device in the above formats:
1. Touch the Administrator or User Panel along the top of the Main Panel display to expand the panel.
2. Select the File Manager utility and press the file manager tab. The File Manager tab will display a list of files
currently stored on the ROS device.
3. If necessary, use the file list type and grower, farm, field (GFF) filters to assist with finding and selecting the
desired files for export.
4. Move the files to Export from the left side of the File Manager to the right side. Alternatively, touch the Select
All option at the top of the file list to select all files currently displayed and matching the set filter conditions.
5. Select the File Export icon.
6. From the File Export screen, select either Slingshot or the listed USB drive. If more than one USB drive is
inserted there may will be multiple choices.
7. With at least one file selected, select one of the following export actions:
•Copy - create a duplicate of the selected information on the destination to be selected
•Move - export the selected information to the destination to be selected and remove the information
from the ROS device.
The Export Files prompt will display.
NOTE: Refer to the ROS Slingshot Field Hub Calibration and Operation Manual for more information on
using the Slingshot Field Hub with ROS.
Send with Folder Structure (.jdp). Select this option to create a job data package (.jdp) on the USB flash drive
with the grower, farm, field (GFF) file structure. The .jdp file may be transferred to a Slingshot viewer or user
account to review job information or create job reports, or to another ROS device via the USB flash drive to
continue the job.
NOTE: While the GFF file structure is transferred to the USB flash drive using this export option, the GFF
assignments will not be inherently associated with the .jdp file if transferred to another ROS device.
To reassociate the .jdp with the GFF information, the GFF structure will need to be imported via the
USB manager and then reassign the .jdp to the GFF using the File Manager tab. Review the USB
Import Manager section on page 49 for assistance with importing the GFF information and the Using
the File Manager section on page 42 for details on using the file manager to reassign the GFF
associations.
Send as Slingshot Archive (.ssa). The Slingshot Archive (.ssa) file type may be used with either a Slingshot user
account or to transfer multiple files to another ROS device. Select this file type to transfer multiple files as one
package.
The .ssa file allows multiple files to be imported into the Slingshot web portal as a single file.
NOTE: If imported onto another ROS device, files exported as an .ssa will retain GFF associations from the
original device. All files exported to the “slingshotArchives” directory on the USB flash drive will be
required to retain the GFF associations from the previous device.
Administrator
or User Panel
File
Manager
File Export
File
Manager
To Next Page
Loading...
