Rawrr Mantis - Page 17

16
Installing the front wheel:
2) Use two 19# wrenches to loosen the front wheel locking nuts, then remove the axle and nuts.
3) Install the front axle spacers on both sides.
Note: Be careful not to crush the seals.
1) Remove the brake caliper pads, place the front wheel between the forks, ensuring the axle
passes through both forks and the front wheel. Use two 8# hex key wrenches to secure the
front axle.
4.Tighten the bolt in the front
wheel axle hole, a total of 4 pieces.