Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C100~RFL-C2000S
43
lower than internal temperature of the laser, restart the laser (advice
to configure alone Air-conditioned room for the laser). For
RFL-C100~RFL-C1000, please wait for the air conditioner to run for
30 minutes before restart the laser. If the alarm continues to occur,
please contact Raycus.
In addition to the above, if there are any questions or errors in using of the
laser, you can contact Raycus to get help.
To Next Page
Loading...
