EasyManua.ls Logo

Raymarine a67 - User Manual

Raymarine a67
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LightHouse™
OPERATION
INSTRUCTIONS
Release 15
English
© 2015 Raymarine UK Limited
Date: 09-2015
Document number: 81360-2-EN

Table of Contents

Other manuals for Raymarine a67

Questions and Answers

  • N
    Nicholas HoganAug 29, 2025
    Why isn't the touchscreen working on my Raymarine Marine Equipment?
    • R
      ricardo23Aug 30, 2025
      If the touchscreen on your Raymarine Marine Equipment does not operate as expected, ensure that the touch lock is disabled. The touch lock can be turned off on the home screen using the Joystick. Also, make sure you are operating the screen with bare fingers, as gloves may prevent correct operation. Calibrate the touchscreen using the setup menus. If there are saltwater deposits on the screen, carefully clean and dry the screen according to the provided instructions.
  • D
    Daniel TurnerSep 5, 2025
    How do I get the Raymarine app on my device for Marine Equipment?
    • S
      sarahfuentesSep 5, 2025
      If there is no Raymarine app on your device, it may not be installed and running. Download the required Raymarine app from the relevant application store and start the Raymarine app on your device.
  • M
    Michelle ChristianAug 28, 2025
    Why is instrument data missing from all Raymarine Marine Equipment displays?
    • D
      Dawn LandryAug 29, 2025
      If instrument, engine, or other system data is unavailable at all displays on your Raymarine Marine Equipment, check the data bus (e.g., SeaTalkng) wiring and connections to ensure data is being received at the display. Verify the overall integrity of the data bus (e.g., SeaTalkng) wiring. Check the source of the missing data (e.g., ST70 instrument or engine interface) to ensure it is operating. Also, check the power to the SeaTalk bus. If a software mismatch between equipment is suspected, contact Raymarine technical support.
  • M
    Martin DuncanSep 23, 2025
    What to do if Raymarine Marine GPS System won't boot up?
    • M
      Mary VasquezSep 23, 2025
      If your Raymarine Marine GPS System product will not boot up or is in a re-boot loop, first refer to the solutions for 'Product does not turn on or keeps turning off'. If the issue persists, it could be due to software corruption. Try re-flashing the latest software from the Raymarine website. As a last resort, on display products, you can try to perform a ‘Power on Reset’; however, this will delete all settings/presets and user data (such as waypoints and tracks) and revert the unit back to factory defaults.
  • M
    Michelle SimmonsSep 6, 2025
    Why aren't my waypoints syncing with Navionics on Raymarine Marine Equipment?
    • L
      Lance WilliamsSep 6, 2025
      If there is no waypoint/routes synchronization with the Navionics Marine app on your Raymarine Marine Equipment, the smartphone/tablet may not have the “Navionics Marine” app installed and running. Download the “Navionics Marine” app from the relevant app store and start the app on the device.
  • L
    lisa11Sep 9, 2025
    How to troubleshoot Raymarine Marine GPS System if it does not start up?
    • K
      kellyflemingSep 9, 2025
      If your Raymarine Marine GPS System or part of it does not start, it is likely a power supply problem. Check the relevant fuses and breakers. Ensure the power supply cable is in good condition and all connections are tight and free from corrosion. Verify that the power source provides the correct voltage and sufficient current.
  • R
    ryandouglasSep 13, 2025
    Why is instrument data missing from some displays on my Raymarine Marine GPS System?
    • E
      Emily BrownSep 13, 2025
      If your Raymarine Marine GPS System displays instrument or other system data missing from some but not all displays, check that all required equipment is connected to the network. If there is a software mismatch, contact Raymarine technical support.
  • N
    nicole29Sep 23, 2025
    Why does my Raymarine Marine GPS System display behave erratically?
    • K
      Kelly BrandtSep 23, 2025
      If your Raymarine Marine GPS System display behaves erratically with frequent unexpected resets, system crashes, or other erratic behavior, check the relevant fuses and breakers. Verify that the power supply cable is sound and that all connections are tight and free from corrosion. Ensure that the power source is of the correct voltage and sufficient current. Go to www.raymarine.com and click on support for the latest software downloads. Perform a factory reset.
  • V
    Vincent OlsonAug 26, 2025
    What to do if my Raymarine Monitor displays a “No Fix” GPS status icon?
    • T
      Thomas MathisAug 26, 2025
      If your Raymarine Monitor displays a 'No Fix' GPS status icon, it could be due to your geographic location or prevailing conditions preventing a satellite fix (check periodically in better conditions or another location), a GPS connection fault (ensure external GPS connections and cabling are correct), or an external GPS antenna in a poor position (ensure the GPS antenna has a clear view of the sky).
  • W
    wilsonandreaAug 26, 2025
    Why does my Raymarine Monitor not turn on or keep turning off?
    • M
      Matthew ReyesAug 26, 2025
      Your Raymarine Monitor might not be turning on or keeps turning off due to several reasons: a blown fuse or tripped breaker (check and replace if necessary, and inspect for cable damage if fuses repeatedly blow), a poor or damaged power supply cable or connections (ensure the cable is fully inserted and locked, check for damage or corrosion, and flex the cable to check for reboots), incorrect power connection (ensure the installation instructions have been followed), or an insufficient power source (check the power supply voltage under load).

Raymarine a67 Specifications

General IconGeneral
BrandRaymarine
Modela67
CategoryMarine GPS System
LanguageEnglish

Related product manuals