Raymarine c97 - Page 143

Buildingaroute
Youcanbuildarouteonatouchscreenmultifunction
displaybyfollowingthestepsbelow.
D117 62-1
Fromthechartapplication:
1.Selectandholdalocationonscreen.
Thechartcontextmenuisdisplayed.
2.SelectBuildRoute.
Thebuildroutemenuisdisplayed.
3.Selectalocationonscreentobethestarting
position.
4.Selectrelevantlocationstoplacesubsequent
waypointsinorder.
Therouteissavedanddisplayedaseach
waypointisplaced.
5.WhencompleteselectFinishBuild.
Thenishroutebuildpopupmessageis
displayed.
6.SelectFollowtoimmediatelyfollowtheroute.or
7.SelectEdittochangetheroutenameorchange
theroutecolor.or
8.SelectExittosavetherouteandreturntothe
chartapplication.
Note:Ifyouplaceawaypointatthewrong
position,selectUndoWaypointfromtheRoute
Menu.
Buildingaroute
Fromthechartapplication:
1.SelectMenu.
2.SelectNavigate.
3.SelectBuildRoute.
Thebuildroutemenuisdisplayed.
4.SelectPlaceWpt.
5.UsingtheJoystickselectalocationonscreen.
6.PresstheOkbuttontoplacetherstwaypoint
intheroute.
7.UsetheJoystickandtheOkbuttontoplace
subsequentwaypoints.
Therouteissavedanddisplayedaseach
waypointisplaced.
8.WhenyourrouteiscompleteselectFinishBuild.
Thenishroutebuildpopupmessageis
displayed.
9.SelectFollowtoimmediatelyfollowtheroute.or
10.SelectEdittochangetheroutenameorchange
theroutecolor.or
11.SelectExittosavetherouteandreturntothe
chartapplication.
Note:Ifyouplaceawaypointatthewrong
position,selectUndoWaypoint.
Buildingarouteusingthewaypointlist
Fromthechartapplication:
1.SelectMenu.
2.SelectNavigate.
3.SelectBuildRoute.
Thebuildroutemenuisdisplayed.
4.SelectUseWPTList.
Thewaypointlistisdisplayed.
5.Selecttherequiredwaypoint.
Youwillbetakenbacktothebuildroutemenu.
6.Addsubsequentwaypointstotheroute.
Therouteissavedanddisplayedaseach
waypointisplaced.
7.WhenyourrouteiscompleteselectFinishBuild.
Thenishroutebuildpopupmessageis
displayed.
8.SelectFollowtoimmediatelyfollowtheroute.or
9.SelectEdittochangetheroutenameorchange
theroutecolor.or
10.SelectExittosavetherouteandreturntothe
chartapplication.
Note:Ifyouselectthewrongwaypoint,select
UndoWaypointfromtheroutemenu.
BuildingarouteusingracemarkIDs
Youcanbuildaroutequicklybyenteringalistof
racemarkIDs.EachRacemarkIDmustbeunique
andmusthavebeenenteredintothecommentseld
oftherelevantwaypoints.
RacemarkIDsmust:
•onlyusealphanumericcharacters
•notincludeanyspaces
•beseparatedfromanyotherinformationinthe
eldusingaspace.
FromtheChartapplicationmenu:
1.SelectMyData.
2.SelectRoutes.
3.SelectBuildusingracemarkIDs.
Aninstructionalpop-upisdisplayed,unlessyou
havepreviouslyselectedDon’tshowagain.
Waypoints,RoutesandTracks
143