Raymarine c97 - Page 258

3.Selectablankcellonthenewpage.
4.SelectSelectDataCategory.
5.Browsetotherequireddatacategory.
6.Selectthedataitemyouwanttodisplay.
7.Repeatsteps3to6foralldatacells.
8.SelectRenamePage.
9.Enterthenewnameforthedatapage.
10.SelectSAVE.
Renamingadatapage
FromtheCustomizemenu:Menu>Customize.
1.SelectEditPage.
2.SelectRenamePage.
Theonscreenkeyboardisdisplayed.
3.Enterthenewnameforthedatapage.
4.SelectSAVE.
Deletingadatapage
Youcandeletecustomorpre-congureddatapages.
Theremustalwaysbeatleast1datapage.
Withthedatapageyouwanttodeletedisplayed:
FromtheCustomizemenu:Menu>Customize.
1.SelectDeletePage.
Aconrmationpop-upisdisplayed.
2.SelectYestodeletethedatapage,orNotokeep
thedatapage.
Note:Thepre-conguredenginepagelayout
isuniqueandcannotberecreatedinacustom
datapage.
Settingupaninstrumentpage(Example)
YoucanusetheDataapplicationtoset-upinstrument
datapages.Theinstructionsbelowareprovideas
anexampleofhowyouwouldsetupanInstrument
datapageforaDST800transducer.
Ensuretherelevanttransducersareconnectedand
availableonyoursystem.
TipCheckthattherelevantdevices(e.g.smart
transducer,iTC-5orInstrumentdisplayappears
inthelistofDevicesshownundertheDiagnostics
menu.
WiththeDataapplicationdisplayed:
1.SelectCreatenewpagefromtheCustomize
menu:(Menu>Customize).
2.SelecttherequiredLayout(e.g.3Cells).
Anewblankpageisdisplayedwiththerstcell
highlighted.
3.SelecttheSelectDataCategoryoptionfrom
themenu.
4.SelectDepth.
5.SelecttheDepthdataitem.
6.Selectthenextemptycellonthepage.
7.SelectSpeed.
8.SelectSpeed.
9.Selectthespeedgraphicyouwanttouse.
10.Selectthenextemptycellonthepage.
11.SelectBacktoviewthelistofDatatypes.
12.SelectEnvironment.
13.SelectWaterTemp.
14.SelecttheWaterTemperaturegraphicyouwant
touse.
15.UsetheBackbuttontoreturntotheEditPage
menu.
16.SelectRenamePage.
Theonscreenkeyboardisdisplayed.
17.Enterthenameforyournewdatapageand
selectSAVE.
18.ExittheMenu.
258
LightHouseMFDoperationinstructions