EasyManua.ls Logo

Raymarine DSM30 User Manual

Raymarine DSM30
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DSM300 & DSM30
Digital Sounder
Module
Installation Manual
Document number: 87080-1
Date: November 2006
Question and Answer IconNeed help?

Do you have a question about the Raymarine DSM30 and is the answer not in the manual?

Raymarine DSM30 Specifications

General IconGeneral
BrandRaymarine
ModelDSM30
CategoryMarine Equipment
LanguageEnglish

Summary

Important Information and Safety

Intended Use and Safety Precautions

Details intended use, general safety notices, and specific cautions for high voltage and transducer cables.

Product Compliance and Lifecycle Management

Product Compliance and Lifecycle

Information on EMC standards, conformity declaration, product disposal, and warranty.

DSM Installation Guide

Introduction and Planning

Covers initial planning, installation considerations, and EMC performance guidelines.

EMC Installation Guidelines

Guidelines for ensuring optimal Electromagnetic Compatibility during installation.

Suppression Ferrites and Connections

Details on using suppression ferrites and connecting to other equipment.

Unpacking and Component Inspection

Procedures for carefully unpacking and inspecting all system components.

Cable Options and Mounting Location

Lists available cable options and guidance on selecting a mounting location.

Mounting the Sounder Module

Detailed instructions and diagrams for physically mounting the sounder module.

Cable Runs and System Connections

Best practices for cable routing and overview of system connection points.

Transducer and DC Power Connections

Instructions for connecting the transducer and DC power supply to the sounder module.

Ground Connection

Importance and method for establishing an effective RF ground connection for the system.

Display Configuration Overview

How to configure the sounder module for different Raymarine display types.

E Series System Configuration

Details on connecting and configuring the DSM with E Series displays, including multi-display setups.

C Series System Configuration

Instructions for connecting and configuring the DSM with C Series displays.

hsb² PLUS Series Display Configuration

Steps for connecting and configuring the DSM with hsb² PLUS (Pathfinder) Series displays.

Maintenance and Troubleshooting Guide

Routine Maintenance and Cleaning

Procedures for routine checks, cleaning the module, transducer, and hull.

EMC Servicing and Safety Guidelines

Guidelines for servicing and safety related to Electromagnetic Compatibility.

System Reset Procedures

Step-by-step instructions for performing a factory reset on E, C, and hsb² PLUS Series displays.

Problem Solving and Solutions

Common sounder problems and their detailed solutions, including a troubleshooting table.

Status LED Indicators

Explanation of the status LED codes for warnings and errors on the sounder module.

Raymarine Support and Contact Information

Online and US Support Information

Details for online support, customer service, and US-based technical/repair contacts.

European and Worldwide Support

Contact information for Raymarine support, service, and parts in Europe and globally.

Technical Specifications

General Specifications

Technical specifications including approvals, size, weight, power, environmental, and connectors.

Sounder Performance Features

Detailed performance metrics for DSM300 and DSM30, including output power, frequency, and depth capabilities.

Related product manuals