34 E-Series Installation Manual
...for new installations
The array and the display should be connected using the split pedestal cable as shown:
Part No Description
E55063 15m Split pedestal cable
E55064 25m Split pedestal cable
PAGE
ACTIVE
WPTS
MOB
MENU
DATA
CANCELOK
RANGE
IN
OUT
D7329-1
Open Array
Boats DC
Power Supply
E-Series Display
Power to display
Power to open array
Split pedestal cable
(15 or 25 metres)
Note: The power supply for both the display
and the open array must be of the same
voltage (using a convertor if necessary) and
from a common supply source e.g. the same
battery or power breaker.
Split pedestal cable
To display
To power
To Open
Array Scanner
D7209-1
Note: You should ensure that the distance (cable route) from the power supply to the
open array is kept to a minimum.
To Next Page
Loading...
