Alarm Continuous bursts of three beeps will indicate an alarm. The
alarm activated will be indicated on the digital display,
accompanied by the flashing symbol. Pressing any button will
silence the alarm. See fault finding section on p37.
Depth Shallow Alarm
The water depth has fallen below the preset alarm level.
The depth value that triggers the alarm is affected by any
keel or waterline offsets that have been added.
See page 22 s11 to set the alarm function.
This alarm does not sound as the depth increases above the
preset alarm level.
Depth Deep Alarm
The water depth has increased above or fallen below the
preset alarm level.
The depth value that triggers the alarm is affected by any
keel or waterline offsets that have been added.
See page 22 s12 to set the alarm function.
Off Course Alarm
The heading has deviated from its locked value by more than
the preset alarm level
See page 22 -S13 to set the alarm function
See page 17 -P33 to lock a heading
Wind High Alarm
The wind speed has increased beyond the preset alarm
level.
See page 22 s14 to set the alarm function.
This alarm does not sound as the wind speed decreases
below the preset alarm level.
Cross Track Error Large Alarm
A large cross track error has been alerted by the GPS.
See page 23 s15 to set the alarm function.
Waypoint Arrival Alarm
A waypoint arrival signal has been received from the GPS.
The waypoint name is shown on the top line of the display.
See page 23 s16 to set the alarm function
Operation
7
To Next Page
Loading...
Need help?
General