32 ST4000+ Wheel & Tiller Autopilots: Owner’s Handbook
4 Maintenance & Fault Finding
minimum interaction between different items of equipment, i.e.
ensure optimum Electromagnetic Compatibility (EMC).
• Always report any EMC-related problems to your nearest
Raymarine dealer. We use such information to improve our
quality standards.
• In some installations, it may not be possible to prevent the
equipment from being affected by external influences. In general
this will not damage the equipment but it can lead to spurious
resetting action, or momentarily may result in faulty operation.
4.3 Product support
Raymarine products are supported by a worldwide network of
distributors and Authorized Service Representatives. If you
encounter any difficulties with this product, please contact either
your national distributor, service representative, or the Raymarine
Technical Services Call Center. Refer to the back cover or the
Worldwide Distributor List for contact details.
Software version
If you cannot trace or rectify the fault, contact your nearest
Raymarine distributor or Service Representative, specifying:
• the product serial number, which is printed on the rear cover of the
autopilot
• the software version number:
•press standby for 4 seconds to display the software version
D5334-1
SECONDS
ST4000+
software
version
81131_7.book Page 32 Wednesday, March 17, 2004 3:59 PM
To Next Page
Loading...
