34 ST70 Instrument User Reference Manual
To run the About Display function:
1. With the instrument switched on, press
MENU
to display the Main Menu, then use
<
or
>
to
select the
Diagnostics
option.
2. Press
ENTER
to display the
Diagnostics
menu.
3. With the
Diagnostics
menu displayed, use
<
or
>
to select the
About display
option, then press
ENTER.
Note that the:.
•
Temperature
should be in the range -30°C to
+70
°C
•
Volts
should be in the range 9 V to 16 V
•
Peak Volts
should be in the range 9 V to
16 V
•
Current
and
Peak Current
should be not
greater than 220 mA
4. Make a note of any data you need then press
ENTER
:
• If you have seen all the available data the display shows the
Diagnostics
menu.
• If there is more data to be displayed, the next page of About Display data is dis-
played. Repeat step 4 until the display shows the
Diagnostics
menu.
Technical support
Raymarine provides a comprehensive customer support service, on the world wide
web and by telephone help line. Please use either of these facilities if you are unable
to rectify a problem.
If you intend seeking technical assistance, please first use the About Display and
About System functions whenever possible, and make a note of the information
available there.
Note: If it is not possible to use the About Display function on a faulty instrument, remember you
may still be able to get system information by running About System at another instrument.
World wide web
Please visit the Customer Support area of our web site at:
www.raymarine.com
As well as providing a comprehensive Frequently Asked Questions section and
servicing information, the web site gives e-mail access to the Raymarine Technical
Support Department and a details of the locations of Raymarine agents, worldwide.
D10095-1
Press ENTER to select.
Main Menu
Diagnostics
About Display
Press ENTER to select
D10097-1
Run Time
Software Ver.
Bootcode Ver.
Hardware Ver.
Temperature
Volts
Peak Volts
Current
Peak Current
V0.20
V2.00
V0.10
35.20 C
12.16 V
12.26 V
180 mA
195 mA
125.75
81284_1.book Page 34 Friday, May 4, 2007 7:29 AM
To Next Page
Loading...
