Chapter 1: ST70 General Information 3
Figure 1-1: Initial setup
Instruments not requiring commissioning
If the ST70 instrument is part of a SeaTalk
ng
system in which at least one other ST70
instrument is already working, then an operational page is displayed at initial switch
on and you can use the instrument immediately. In this case, the new instrument will
adopt the settings that already apply in the system.
POWER ON
First switch on
To normal operation
(Figure 1-2)
Initial setup
Welcome page
Language select
page
ENTER
SELECT BOAT TYPE
ENTER
TIME & DATE SUMMARY
ENTER
TIME & DATE SETUP
ENTER
UNITS SUMMARY
ENTER
UNITS SETUP
ENTER
ENTER
Hold down
D9777-1
ENTERCANCEL
MENU
Press ENTER to select
Language
English (UK)
81284_1.book Page 3 Friday, May 4, 2007 7:29 AM
To Next Page
Loading...
