Raymarine V850 User Manual

Distributed by
Any reference to Raytheon or
RTN in this manual should be
interpreted as Raymarine.
The names Raytheon and RTN
are owned by the
Raytheon Company.

Raymarine V850 Specifications

General

Brand	Raymarine
Model	V850
Category	Marine Equipment
Language	English

Summary

SECTION 2: INSTALLATION

2.3 INSTALLING THE DISPLAY UNIT

Mounting the V850 display unit, including standard and console mounting.

2.4 CONNECTIONS

Details various cable and data connections for power, transducers, and external devices.

2.5 TRANSDUCER INSTALLATION

Installation methods for transducers: general, transom, and thru-hull.

SECTION 3: OPERATION

3.2 THE BASIC CONTROLS

Description of the V850's main control keys and their operational functions.

3.3 DISPLAY MODES

Explanation of V850 display modes: Fishfinding, Plotting, and Navigation.

3.3.1.10 Setting and Using Alarms

Configuration and use of Shallow, Deep, Fish, and Nav alarms.

3.3.1.10.1 The SHALLOW Alarm

Setup and function of the Shallow Water Alarm.

3.3.1.10.2 The DEEP Alarm

Setup and function of the Deep Water Alarm.

3.3.1.10.3 Setting the Fish Alarm

Setup and function of the Fish Alarm.

3.3.1.11 Noise Suppression/Interference Reduction

Using Noise Suppression to reduce interference.

3.3.5.2 NAV ALARMS - The Set Alarm Menu

Setting navigation alarms: Arrival, Anchor, Off-Course.

3.3.5.2.1 THE ARRIVAL ALARM

Setup and function of the Arrival Alarm.

3.3.5.2.2 THE ANCHOR ALARM

Setup and function of the Anchor Alarm.

3.3.5.2.3 OFF COURSE ALARM

Setup and function of the Off Course Alarm.

3.3.5.2.4 BOUNDARY ALARM

Setup and function of the Boundary Alarm.

3.3.6 PLOT/TEMP Mode

Plotter/Temperature display for tracking and temperature monitoring.

3.3.6.6.2 Setting TEMP ALARMS

Setting temperature alarms for high and low limits.

3.3.7 NAVIGATION Display

Explanation of Navigation display components and information.

3.3.7.1 Navigation Operations

Performing navigation tasks: going to waypoints, following routes.

3.3.7.1.1 GOTO a Selected Waypoint

Navigating to a specific waypoint.

3.3.7.1.2 Store an EVENT

Saving the current position as an event.

3.3.7.1.3 Route Following Operations

Following pre-programmed routes.

3.4 MENU Key Operations

Accessing and navigating the V850 menu system.

3.4.3 The Navigation Menu

3.4.3.1 NAVIGATE SETUP Menu

Navigation settings: magnetic correction, display type.

3.4.3.1.1 Magnetic Correction

3.4.3.2 STORE WAYPOINTS Menu

Storing, managing, and selecting waypoints.

3.4.3.2.1 ENTER NEW WPT?

3.4.3.2.2 Waypoint List Operations

3.4.3.2.3 Naming Waypoints

3.4.3.2.4 Store Waypoint

3.4.3.2.5 Editing Waypoints

3.4.3.2.6 SAVE Waypoint Operations - Waypoint List

3.4.3.3 Route Plan Operations

Creating, managing, and editing route plans.

3.4.4.1 Route Menu

3.4.4.1.1 Selecting Routes

3.4.4.1.2 Making Route Plans

Creating new route plans by linking waypoints.

3.4.4.1.3 Editing Routes

3.4.4.1.4 Deleting Route Plans

3.5 GPS MODE

Using the V850 with a GPS sensor for navigation.

3.5.1 Getting Started with GPS

3.5.1.1 Estimated Position

3.5.2 The Satellite Status Page

3.5.2.1 Satellite-SF (Special Functions)

Special functions for satellite acquisition and positioning.

3.5.2.1.3 HDOP LEVEL

3.5.2.1.4 POSITION CORR.

3.5.2.1.5 Geodetic System (Data Corrections)

Selecting geodetic datums for accurate coordinate display.

3.5.2.1.6 L/L CAL

SECTION 4: MAINTENANCE

4.2 ELECTRICAL

4.2.1 Replacing the Fuse

4.2.2 Replacing the Battery

4.3 TROUBLE SHOOTING CHART

Chart to diagnose and resolve common V850 issues.

4.5 SPECIFICATIONS

Detailed technical specifications for the V850 unit.

4.6.2 Fishfinder Specifications

Specific technical parameters for fishfinder functions.