28
DisplayIndicationCycle Interfac e
Switching Push-assistance Mode On/Off
To activate the push-assistance function, hold the “-” button.
After 2s, The E-bike’s drive is activated at a uniform speed of
6 Km/h while the screen displays “
” . The push-assistance
function is switched off as soon as you release the “-” button on
the operating unit .The E-bike system stops the power output
immediately.
• Push-assistance function may only be used when pushing
the E-bike.
Be aware of danger of injury when the wheels of the E-bike do
not have ground contact while using the push-assistance func-
tion.
To Next Page
Loading...
