RCA RP4010 - Page 10

EN
8
Setting the Preset Radio
Stations
1. Press RADIO ON/BAND to turn on the
radio.
2. Press RADIO ON/BAND to change the
broadcast band.
3. Press << or >> to tune to your desired
radio station.
4. If you want to memorize this radio sta-
tion, press SET once, and then press
MEMO RECALL repeatedly to choose
the radio station number you want to
record in.
5. Press SET again to confirm.
6. If you set the radio station in the AL
location, it will be the wake up radio
station of the alarm.
Operating the Radio
Automatic Radio Station
Search
1. Press RADIO ON/BAND (located on the
top of the radio) to turn on the radio.
2. Press and hold << or >> for 2 seconds, it
will automatically search a radio station
for you.
Selecting the Preset Radio
Stations
1. Press RADIO ON/BAND to turn on the
radio.
2. Press MEMO RECALL repeatedly to se-
lect your desired preset radio station.
Overwriting the Preset Radio
Stations
1. First, press << or >> to tune your de-
sired preset radio station.
2. Press SET once and then press MEMO
RECALL repeatedly to choose the ra-
dio station number you want to over-
write.
3. Press SET again to confirm.
Deleting the Preset Radio
Stations
1. Press MEMO RECALL repeatedly to se-
lect your preset radio station you want
to delete.
2. Press and hold SET for 3 seconds to de-
lete the selected preset radio station.
Note:Note:
Note:Note:
Note:
This unit can store up to 11
preset radio stations, while
AL AL
AL AL
AL location is for the wake
up radio station.