RCA RP4010 - Alarm Settings; Setting Sleep Time; Viewing Remaining Time; Sleep to Radio

EN
12
Alarm Settings
Sleep to CD
Press Play/pause after setting the sleep
time to begin CD playback. The unit will
turn off automatically once the sleep
time is reached.
Viewing Remaining Time
Press SLEEP to read the remaining
sleep time.
Setting Sleep Time
In sleep mode, the radio and CD will turn
off automatically. To set the sleep time,
simply:
1. Press SLEEP, then the time display will
exhibit 0:59.
2. While holding SLEEP, press << or >> to
set the sleep time. The time range is
from 1 minute to 2 hours.
3. Release SLEEP and the current time will
be shown again.
Sleep to Radio
Turn on the radio after setting the sleep
time, you may select the radio station as
usual. Once the sleep time is reached,
the radio will turn off automatically.
Sleep radio station will automatically
switch to the last sleep radio station
setting. You must reset to sleep to a
different radio station.
1. Press RADIO ON/BAND.
2. Press << or >> to tune to the radio sta-
tion you want to sleep to.
Tip:Tip:
Tip:Tip:
Tip:
When
SLEEP SLEEP
SLEEP SLEEP
SLEEP is activated
again, the sleep time will be
the same as the one you
have set before.
Tip:Tip:
Tip:Tip:
Tip:
If you decide to turn off the
unit sooner, press SNOOZE or
OFF.