RCA RP4010 - Waking to RADIO; Turning off Alarm; Waking to CD

EN
10
2. Press WAKE 1 or WAKE 2 to select wak-
ing up by CD
.
3. Rotate VOLUME CONTROL to your
desired wake up volume.
4. Press OFF to turn off the radio.
You can select your CD wake up track by
the following procedures.
1. In CD mode, while pressing WAKE UP
Station / Track, press << or >> to se-
lect your desired CD wake up track.
Turning off Alarm
Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over. (see
“Snooze” on page 13).
Stop the alarm
Press OFF. Then, the alarm will be on the
following day at the same time.
Disable the alarm permanently
1. Press CANCEL.
2. The WAKE 1
/
/
or WAKE 2
/
/
icon will flash, while it is flash-
ing, press WAKE 1 or WAKE 2 to can-
cel the alarm. Corresponding WAKE in-
dicator will disappear.
3. To activate the alarm again, press
WAKE 1 or WAKE 2 , and the WAKE
indicator will appear.
Note:Note:
Note:Note:
Note:
You can activate the
previous wake settings by
pressing
WAKE 1 WAKE 1
WAKE 1 WAKE 1
WAKE 1 or
WAKEWAKE
WAKEWAKE
WAKE
22
22
2.
Operating the Alarm
Waking to RADIO
When the waking to radio is selected, the
icon is displayed.
1. Set the wake time (see directions on
the previous page).
2. Press WAKE 1 or WAKE 2 to select wak-
ing up by RADIO
.
3. Rotate VOLUME CONTROL to your
desired wake up volume.
4. Press OFF to turn off the radio.
You can select your wake up radio station
by the following procedures.
1. Press RADIO ON/BAND to turn on the
radio.
2. Press << or >> to tune to your desired
radio station.
3. Press and hold WAKE UP Station /
Track to store the current radio station
as the wake up radio station.
will
show on the display.
Waking to CD
When the waking to CD is selected, the
icon is displayed.
1. Set wake time (see directions on the
previous page).
Note:Note:
Note:Note:
Note:
“AL” refers to the Alarm
Station. If no WAKE
STATION is set, the wake
up radio station will stay at your last
listening radio station.