EasyManua.ls Logo

RCA RP4010 - Operating the Radio; Tuning the Stations

RCA RP4010
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
Operating the Radio
Antennas
FM antenna - The power cord acts as your
FM antenna. It picks up moderate to
strong radio stations and eliminates the
need for an external antenna in most
strong signal areas. Be sure the power cord
is stretched to its full length. Do not coil
or bunch the cord together. Changing
position of the power cord may improve
reception.
AM Antenna - A built-in ferrite rod
antenna eliminates the need for an
outside antenna for AM reception.
Rotating the unit slightly may improve
reception of distant AM stations.
Tuning the Stations
1. Plug the power cord into any 120V AC
household outlet.
2. Press RADIO ON/BAND (located on the
top of the radio) to turn on the radio.
3. Press RADIO ON/BAND to select the
desired broadcast band.
4. Press << or >> to tune to your desired
radio station.
5. Press OFF to turn off the radio.
7

Related product manuals