RCA RTS202 - Accessing Disc Content Information

EN
12
Title/chapter (DVD)/track (audio
CD)
To directly access a title, chapter (DVD) or an
AUDIO#$PRESS).&/PRESS/+3ELECTTHE
4ITLE444RACK42+OR#HAPTER#(ICONAND
enter a number directly with the numeric buttons.
0RESS/+AGAINTOCONlRM
Time display
To access the Time Display, press INFO on the
remote. Press the up/down buttons repeatedly
to display:
DVD: Chapter elapsed time, Chapter remaining
time, Title elapsed time and Title remaining
time.
Audio CD: Track elapsed time, track remaining
time, disc elapsed time, disc remaining time.
To directly access a location on the disc which does
not correspond to the start of a title or chapter,
PRESS).&/ONCEANDPRESS/+HIGHLIGHTTHE4IME
Display icon using the arrow buttons, then enter
a time with the number buttons (hh:mm:ss) and
PRESS/+
Audio (DVD)
Some discs have several audio tracks used for
different languages or different audio formats.
To change the language or audio format during
playback:
1. Press the INFO button twice.
2. Use the left/right arrow buttons to select the
Audio icon, or press the AUDIO button on the
remote control.
3. Choose a language or an audio format with
the up/down arrow buttons.
This option is only available if the disc offers
dialog languages or audio formats. When you
change the dialog language using the Info menu,
it only changes the dialog language of the disc
being played. When you eject the disc or switch
off the unit, the language will revert to the one
you selected in the Language Setup menu (see
page 15).
Subtitles (DVD)
Subtitles are turned off by default. Turn on
Subtitles as follows:
1. While the disc is playing, press INFO twice,
then select the Subtitles icon using the left/
right arrow buttons.
2. Select a language using the up/down arrow
buttons.
3. To turn subtitles off, select the Off option or
press SUBTITLE on the remote.
When you change the language of the subtitles
using the Info menu, it only applies to the disc
currently being played. When you eject the disc
and switch off the unit, the subtitles will default
to the subtitle language you selected in the
Languages menu (see page 15). This function may
not be available on all discs.
Camera angle (DVD)
Some discs offer different camera angles for
specific scenes.
1. To change the camera angle, press the ANGLE
button on the remote or press the INFO button
twice and select the Camera angle icon with
the left/right buttons.
2. Choose the angle with the up/down
arrow buttons.
Note: Many discs only have one title.
Note: Time display function may not
be available on all discs.
Note: If the disc was recorded using a
single camera angle, this function is
not available.
RCA RTS202 ib.indd 12 6/6/2008 11:07:37 AM