RCA RTS202 - Radio Operations; Tuning, Storing, and Retrieving Radio Stations

EN
15
Radio
The unit has a built-in tuner that allows for FM
radio function. The AM loop antenna allows for
AM radio function.
Manual tuning
1. Connect the FM antenna and the AM loop
antenna at the back of the unit. Rotate the
AM loop for better reception.
2. Press TUNER.
3. Tune a station by pressing TUNER+/- repeatedly
until the desired station is found. Alternatively,
you can press and hold the same buttons
down for about one second to activate the
automatic search function. In this mode the
unit will automatically tune frequencies until
it finds a station.
4. Repeat step 3 to tune to another radio
station.
5. Press TUNER to toggle between FM and
AM.
Storing radio stations
The unit can store up to 30 radio stations in its
memory. You can enter every single radio station
yourself or the unit can store all available radio
stations automatically in ascending order.
Automatic preset programming
1. Press TUNER to enter the Tuner mode and
select FM.
2. Press and hold TUNER for a few seconds to
start automatic preset programming.
3. Radio frequencies will be browsed and radio
stations stored automatically. When all the
available radio stations are stored or all 30
memory locations are full, the auto preset
programming function will stop.
Manual preset
1. Tune to a radio station (see “Manual tuning”
for details).
2. Press MEMORY. While the Program Preset
number is still flashing, input your desired
preset number using the numeric buttons or
press the CH+/- buttons, then press MEMORY
to store it.
Retrieving preset stations
1. Press TUNER to enter the Tuner mode.
2. Press CH +/- to search up or down for the
preset stations or directly press the numeric
buttons.
Tips:
s7HENTHE&-STATIONBROADCASTS
St e r e o s o u n d i s f o u n d , S T i s
displayed.
s7HENYOUMANUALLYTUNEINTOAWEAK&-
station, press AUDIO on remote control to
switch from Stereo to Mono mode. This will
reduce the background noise.
s)FTHEREISANYINTERFERENCECHANGETHE
antenna’s position until ideal sound
reception is obtained. TV and other
electronic devices could be the cause of
interference, so try to position the antenna
away from them.
s!WEAKSIGNALCANAFFECTTHEh!UTOMATIC
preset programming” function’s efficiency.
Adjust the antenna for better reception and
a more efficient search.
RCA RTS202 ib.indd 15 6/6/2008 11:07:38 AM