To Next Page

To Previous Page

ENGLISH

Ampliﬁer output to link the satellite speaker.

POWER switch

Push it to turn ON / OFF the ampliﬁer.

Before switching the ampliﬁer ON, check all the connections and turn fully

counterclockwise (– ∞) the volume control

VDE Inlet with fuse.

100-120V~ T 6.3 A L 250V

220-240V~ T 3.15 A L 250V

Before connecting the power cord, check if the A/C Power corresponds to the voltage

indicated on the rating plate on the unit. If not, please contact your RCF dealer.

Connect the power cord only to a A/C Power socket outlet with a protective earthing

connection.

When replacing the fuse, refer to the silkscreen indications.

WARNING: the VDE Power Connector is used to disconnect the system from the power

supply network. It must be always easily accessible after the installation and during the

use of the system.

10 11

Other manuals for RCF EVOX JMIX8

Questions and Answers:

Need help?

Do you have a question about the RCF EVOX JMIX8 and is the answer not in the manual?

General