The RCF Shape Designer requires an IBM compatible PC with the Windows® 98, Windows®
98SE, Windows® 2000, Windows® ME, Windows® XP, or Windows NT® operating
systems. It is not designed to work with Windows® 3.x, Windows® 95, or Macintosh®
operating systems.
Use the RCF Shape Designer for designing HDL20-A arrays. The RCF Shape Designer’s
primary function is to determine the configuration that will provide the best vertical
performance for a given application. Various venue dimensions are entered that allow the
RCF Shape Designer to calculate the resultant array performance.
Once you have installed RCF Shape Designer, it will be visible as a shortcut in All Programs
via your Windows Start button.
A single click on the RCF Shape Designer tab will open the following page:
A single click on the window will open the following page:
Filling the blank tabs it’s possible to start the program.
COMPUTER REQUIREMENTS
INTRODUCTION
USING RCF SHAPE DESIGNER
SOFTWARE
To Next Page
Loading...
Need help?
General
