41
Filling the blank tabs it’s possible to start the program:
ENTERING VENUE DATA
For best results, planes should be used as follows:
Floor is used to simulate the main floor area from the stage to a rear bleacher or boundary.
Plane 1 is used to simulate any audience continuation behind Floor (e.g. a rear bleacher) from the end of the main floor
to furthest and highest seat below Plane 2.
Plane 2 is used to simulate the furthest/highest audience area.
Example: audience modelling
Enter the height, length and elevation of up to three planes.
For all planes Length refers to the horizontal length of that plane
For all planes Height refers to the height of the rear of the plane.
To Next Page
Loading...
Need help?
General
