RCm GIGA Series - User Manual

Questions and Answers

S
Steven DoughertySep 18, 2025
Why is the detergent solution not dispensing properly on my RCm Scrubber?
- P
  Peter JoyceSep 18, 2025
  If the detergent solution isn't dispensing properly on your RCm Scrubber, it could be due to several reasons. The water supply hoses on the brushes might be clogged, so clean the piping. The hoses could also be crushed, in which case you should restore the hose or replace it. The water filter (solution) might be clogged, so clean the filter. Make sure the water filter (solution) is perfectly closed. A blocked closing electromagnet could also be the problem, requiring replacement. Check that there is water in the tank and fill the water tank if needed. Finally, check the water pump operation.
E
Eddie MorenoSep 13, 2025
Why is my RCm GIGA not cleaning well?
- T
  Tiffany SchmidtSep 13, 2025
  If your RCm Scrubber isn't cleaning well, consider these possibilities: the brushes may be badly worn and need replacement, or they might be unsuitable for the type of floor you're cleaning, so use suitable brushes. The detergent itself could be unsuitable, requiring a replacement. Poor brush pressure on the floor might be the issue, so try adjusting the pressure. Finally, a high operating speed can reduce cleaning effectiveness, so decrease the speed.
K
Kristine SmithSep 10, 2025
What to do if my RCm GIGA Scrubber doesn't move?
- D
  davidpaulSep 10, 2025
  If your RCm Scrubber isn't moving forward or in reverse, there are several possible causes. Check if the accelerator pedal connector is disconnected and reconnect it if necessary. A broken safety micro-switch under the seat could also be the problem, requiring replacement. The differential with electric traction motor might be damaged or have worn carbon brushes, which would mean replacing the motor or carbon brushes. It's also possible that the traction motor has thermal protection activated, in which case you should wait for the motor to cool. Finally, check if the electric brake pedal is pressed or damaged; release the pedal or replace it if damaged.
A
Andrew SmithAug 26, 2025
Why is the detergent solution not coming down on the brushes of my RCm GIGA?
- D
  davidcaldwellAug 26, 2025
  If the detergent solution isn't coming down, or only a small amount is coming out, start by checking the water supply hoses on the brushes for clogs and clean them if necessary. Inspect the hoses for crushing and restore or replace them if damaged. Ensure the water filter (solution) is clean and tightly closed. If the closing electromagnet is blocked, replace it. Verify there's water in the tank and fill it if empty. Finally, check the water pump operation.
B
Bradley FrenchAug 28, 2025
How to fix uneven detergent distribution on my RCm GIGA brushes?
- R
  Ryan RichAug 28, 2025
  Uneven detergent distribution may be caused by clogged water supply hoses on the brushes. Clean the piping to resolve this issue.
K
Kathryn OconnorAug 29, 2025
Why does my RCm GIGA machine not move forward or in reverse?
- K
  Kristen KruegerAug 30, 2025
  If the machine isn't moving forward or in reverse, check the accelerator pedal connector and reconnect it if disconnected. Replace the safety micro-switch under the seat if it's broken. If the differential with the electric traction motor is damaged or the carbon brushes are worn, replace the motor or carbon brushes. If there is traction motor thermal protection, wait for the motor to cool. Ensure the electric brake pedal is released and replace it if damaged.
Z
zcortezAug 31, 2025
Why does my RCm GIGA Scrubber machine not clean well?
- M
  Michael KellyAug 31, 2025
  If the machine isn't cleaning well, the brushes may be badly worn and need replacement. Ensure the brushes are suitable for the floor type. The detergent might be unsuitable, so replace it. Adjust the brush pressure on the floor, and decrease the operating speed.
C
Charles SmithSep 2, 2025
What to do if the vacuum motor of my RCm GIGA Scrubber switches off and doesn't start?
- S
  Steven GreeneSep 2, 2025
  If the vacuum motor switches off and doesn't restart, check the motor and its connections for damage, and replace the motor if necessary. Ensure reverse gear is disengaged. If the recovery tank float has cut power, deactivate the vacuum function. If the float is blocked by impurities, clean it.
W
warrenjohnSep 15, 2025
Why does the vacuum motor on my RCm GIGA keep switching off?
- V
  Vanessa McgeeSep 15, 2025
  The vacuum motor on your RCm Scrubber might be switching off due to a few reasons. Check the motor connection and for any damage to the motor; repair the connections or replace the motor if needed. Make sure reverse gear is not engaged. The recovery tank float may have cut power to the vacuum motor, try to deactivate the vacuum function by pressing button 6. The float could also be blocked by impurities, requiring cleaning.
T
Troy MillerSep 12, 2025
Why does my RCm Scrubber stop suddenly?
- K
  Kara JohnstonSep 12, 2025
  Your RCm Scrubber could be stopping suddenly due to several reasons: * Batteries might be disconnected, so ensure they are connected. * Batteries might be low, requiring a charge. * Motors might be under too much stress, tripping the thermal magnetic protection (wait a minute and restart). * The operator got up, activating the micro-switch under the seat (sit and press the accelerator). * There might be an anomaly, indicated by an alarm on the display.