Why is there no flow of detergent solution to the disc brush on my RCm KILO Scrubber?
The lack of detergent solution flow to the disc brush may be due to several reasons. The detergent solution tank might be empty, so refill it. Alternatively, the detergent solution filter or outlet nozzle might be clogged. Try cleaning the filter or the nozzle.
What to do if the RCm KILO squeegee leaves dirty marks on the floor?
If the squeegee is leaving dirty marks, there might be debris under the squeegee rubbers, so clean the squeegee. The squeegee rubbers might also be worn, chipped, or torn, in which case you should turn or replace them. Finally, the squeegee may not be lying correctly; adjust the height of the wheels supporting the squeegee.
Why is the suction of recovery water insufficient in my RCm KILO?
Insufficient suction of recovery water could be due to a dirty squeegee or worn/damaged squeegee rubbers; clean the squeegee or turn/replace the rubbers. It could also be that the tank cover is not closed properly or the gasket is not working; close the cover properly and clean or replace the gasket.
What to do if there is no recovery water suction in my RCm KILO?
The absence of recovery water suction can occur if the recovery water tank is full; empty the tank. Another possible cause is the hose being disconnected from the squeegee; connect the hose.
How to troubleshoot insufficient flow of detergent solution to the disc brush in RCm Scrubber?
An insufficient flow of detergent solution to the disc brush could be caused by a dirty detergent solution filter, so clean the filter. Alternatively, the detergent solution outlet nozzle could be dirty, so clean the nozzle. The detergent solution tank itself might also be dirty, so clean the tank.
Why is there insufficient detergent flow to the disc brush on my RCm Scrubber?
If there's insufficient detergent flow, the detergent flow percentage might be set too low; increase the percentage. Alternatively, the detergent feeding system might be clogged; clean the system.
What to do if the disc brush does not clean on RCm Scrubber?
If the disc brush isn't cleaning, the brushes may be excessively worn and not touching the floor. Replace the brushes.
What to do if the luminous indicator doesn't light up and the motors don't work on my RCm KILO Scrubber?
If no luminous indicator lights up and the motors aren't working, the battery connector might be disconnected; connect the connector. The batteries might also be faulty; charge the batteries. Finally, the emergency stop button might be pressed; release it.
Details the manual's purpose, scope, and recommended reading for operators and technicians.
Explains where to find the serial number, model, and year of manufacture on the machine.
Defines the machine's intended use for cleaning smooth floors and its limitations.
Advises contacting qualified personnel for spare parts and maintenance.
Explains safety symbols, conventions, and general precautions for unpacking.
Explains the meaning of DANGER, ATTENTION, WARNING, NOTE, and CONSULTATION symbols.
Provides essential safety guidelines for machine operation and maintenance.
Identifies and labels the main components of the machine using numbered diagrams.
Details the functions of buttons, displays, and indicators on the control panel.
Explains key safety features like electromagnetic brake and seat switch.
Lists detailed technical specifications of the KILO scrubber drier.
Lists available optional accessories and components for the machine.
Defines the various electrical components and their designations used in the wiring diagram.
Provides the detailed electrical wiring schematic of the machine.
Details how to release the brake and manually move the machine.
Provides instructions for installing, handling, and setting battery types.
Instructions for charging batteries using an external charger.
Instructions for charging batteries using an on-board charger.
Outlines essential checks before starting the machine, including foreign bodies and the brake.
Step-by-step guide for attaching and removing disc brushes.
Table and guidance for selecting the appropriate disc brush based on floor type.
Instructions for mounting and dismounting pad holder driving discs.
Table and guidance for selecting the correct pad for the pad holder.
Step-by-step instructions for fitting and removing the squeegee.
Table and guidance for choosing the right squeegee rubbers for different floor types.
Instructions for checking the recovery tank and filling the detergent tank.
Guide for installing and filling the optional 5-litre detergent tank.
Explains how to check the detergent and recovery water tank levels.
Step-by-step guide to start the machine, including safety checks and control panel functions.
Procedures for safely stopping the machine and its functions.
Details adjustments for squeegee, detergent flow, speed, and checks during operation.
Instructions for safely draining and cleaning the recovery water tank.
Steps for emptying and cleaning the optional 5-litre detergent tank.
Activities to perform after each use, including cleaning and storage.
Steps for preparing the machine for storage longer than 30 days.
Schedule for regular maintenance tasks based on time or hours of operation.
Specific checks recommended after the initial 8 hours of operation.
Detailed instructions for cleaning the squeegee and its components.
Procedures for inspecting and replacing front and rear squeegee rubbers.
How to adjust the squeegee height for proper drying.
Steps for cleaning the disc brush and checking for wear.
Detailed procedure for cleaning the recovery water tank.
Instructions for cleaning the suction filter and detergent solution filter.
Guide for cleaning the nozzle that supplies detergent to the disc brush.
Procedures for opening/closing the battery case and disconnecting/connecting the battery.
Guide for checking and replacing fuses, with warnings about technician intervention.
Steps for removing and reinstalling the vacuum motor.
A table listing common issues and their probable causes and solutions.
Guidelines for environmentally responsible disposal of the machine at the end of its life cycle.
General| Power Source | Battery |
|---|---|
| Voltage | 24 V |
| Working width | 510 mm |
| Power Consumption | 0.75 kW |
| Brush Width | 510 mm |
To Next Page
