26
TANKS
Checking the recovery water tank
Lift the cover (A) using its grip (B) and check that the recovery water tank (C) is empty, otherwise empty it as described
in the speci c paragraph “Emptying of tanks”.
Filling the detergent solution tank with water (or washing water)
The tank can be lled in one of the following ways, depending on the inlet version on the machine.
!
WARNING!
The temperature of the water inserted in the tank must not exceed 40°C (100°F).
!
WARNING!
Use a proper detergent for the type of cleaning to be carried out.
Only use low foam and non- ammable liquid detergents; suitable for the machine to be used.
During use of detergents for cleaning oors, follow the instructions and warnings on the labels.
Use suitable gloves and protective devices before handling oor cleaning detergents.
Inlet in basic version
1. Unscrew the cap (D) and pour water in through its inlet.
2. After lling, screw the cap (D).
Inlet in version with lling kit
1. Extract the lling kit (F), put the opening (G) under a water tap and ll the tank through the inlet (E)
2. After the lling stage, place back the kit (F) in its seat (E).
B
A
C
D
E
F
G
To Next Page
Loading...
