17
PUSHING/TOWING THE MACHINE
When traction cannot be used (no batteries, at batteries, faults, etc.), the electromagnetic brake must be released as
follows to push/tow the machine:
• Insert the key (A1) in the appropriate seat (A2) and completely tighten it. During this operation, gently push
the machine back and forth to facilitate releasing the electric brake and thus be able to manually move the
machine.
Never exceed a speed of 3 Km/h during pushing/towing.
• When nished, unscrew and remove the key to apply the brakes again and bring the machine back to safe con-
ditions. Store the key in a safe place and within reach in the event the machine has to be moved.
!
ATTENTION!
After having moved the machine and to reactivate the electromagnetic brake (A), always remember to remove
the key (A1). Check that the electromagnetic brake is reactivated by pushing the machine and verifying the
condition of the brakes.
!
ATTENTION!
Never turn the machine on with the key (A1) in released electromagnetic brake position. Release the electro-
magnetic brake only for the time required to move the machine.
AA1
A2
A1
To Next Page
Loading...
