To Next PageTo Next Page
Need help?Do you have a question about the RCm TERA 1102 RT and is the answer not in the manual?
Key safety and operational guidelines for using the machine.
Behavioral standards to avoid machine damage and dangerous situations.
Precautions for operating the machine in freezing temperatures.
Rules for qualified operators, avoiding modifications and unsafe practices.
Mandatory instructions for operators regarding machine guards and safe operation.
Warning against using vacuum system without water, voids warranty.
Requirement for using qualified personnel for maintenance, revision, or repair.
Key operational metrics like washing capacity, width, and speeds.
Specifications for drive, brush rotation, and vacuum motors, including total power.
Battery type, dimensions, weight, water type, and autonomy.
Brake position and types (service, electric).
Essential steps to follow when transporting the machine, including tank emptying and securing.
Essential safety and operational guidelines for using the scrubber.
Checklist for preparing the scrubber for initial operation.
Ensures the scrubber only operates with the operator correctly seated.
Procedure for starting the machine and initial display information.
Steps for setting speed, direction, brushes, water, and vacuum before washing.
Procedure to activate GO GREEN mode for reduced consumption.
Setting parameters for water, detergent, and brush pressure.
Procedure to access and modify machine parameters with password.
Using buttons to adjust parameters and confirm settings.
Accessing modifiable parameters and sub-menus.
Instructions for filling the solution tank with water and detergent.
Procedure for emptying and cleaning the dirty water recovery tank.
Guidance on choosing the right detergent and using low-foam options.
Step-by-step instructions for removing and installing disc brushes.
Instructions for replacing roller brushes, including warnings.
Instructions for mounting and adjusting the squeegee for optimal drying.
Procedure for cleaning brushes and squeegee for optimal performance.
Guide to replacing worn rubber blades for effective drying.
Details on the integrated electric brake system and its operation.
List of alarms related to the function board, with causes and solutions.
List of alarms related to the inverter traction system, with causes and solutions.
General
