EasyManua.ls Logo

RCm KILO - Post-Use Procedures and Storage; Routine Post-Use Procedures; Procedures for Extended Storage

RCm KILO
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
AFTER MACHINE USE
the following activities must be carried out at the end of work after machine use.
1. Remove and clean the brush(es) or pad holder, as described in the Maintenance chapter.
2. Empty the tanks, as described in the speci c paragraph.
3. Remove and clean the squeegee, as described in the Maintenance chapter.
4. Recharge the batteries if necessary, as described in the Maintenance chapter.
5. Store the machine in a dry and clean place with the brush(es) or pad holder and squeegee raised.
LONG DOWNTIME OF MACHINE
If the machine is not to be used for more than 30 days, you must:
1. Follow what is indicated in the After machine use” paragraph.
2. Clean the detergent feeding system (DETERSAVER - upon request), as described in the “Emptying the 5-Litre
detergent tank” section.
3. Disconnect the connector of the batteries, as described below.
extract the left pin (A), then rotate it a half turn to lock it in the extracted position.
extract the right pin (B) and keep it in the extracted position.
use the handle (C) to extract the batteries holder case (D).
disconnect the connector (E) of the batteries.
put the batteries case (D) in its seat, unlock it, and engage it to retainer (B) and to retainer (A).
4. Store the machine in a dry and clean place with the brush(es) or pad holder and squeegee removed or raised.
DA
B
D
C
E

Table of Contents

Related product manuals